Setup Procedure1 1. To allow the magnetic tield sensor to rctate in a honzontal

Question

Setup Procedure1 1. To allow the magnetic tield sensor to rctate in a honzontal circle, acjust the rotary motion sensor clamp so the ang e indicator reads 90 degrees with the magnetic tield sensor on top 2. Put the dip neadle in its horizontal orientation and position the dip needle directly below the rotary motion sensor. Align the case of the rotary motion sensor with the compass neede. Use the rotary motion sensor case as a reference to the 3. Rotate the magnetic field sensor sa the langth of the probe is perpendicular to the direction of the Earth's field as indicated by the rotary motion sensor case. Slip the zero gauss chamber over the magnetic field sensor probs and press the 1. With the magnetic field sensor still aligned as in Part 3, click 'Star' in Capstone. Slowly and steadily rotate the rotary motion sensor pulley through 380 degrees. Be sure to rotate in the direction that gives positive angles. Capstone will 5. To eliminate magnelic noise fro electrical circuils, enter a smoothirng faclor into the Cepslore caculator. For example, try B-sicolh 8,smoolh8x. Click 'Accept in the caculator window. You shoukd see the graph updale with smoolher gencral dircction cf the Earth's magnctic ficld. Remove the dp needio so its magnetic ticld won t intertere with the expcnment. tare button on top cf the magnetic field sensor. This will ensure that the maximum on the magnetic field senscr will not be excecded during the experiment. automatically stop when 360 degrees is reached data Maximum value of the horizontal magnetic f eld 0360 G

Explanation / Answer

As given by information

Bhorizontal=0.36 G

Btotal=0.628

cos(theta)=0.36/0.628=0.5732

we got

theta=cos^(-1)(0.5732)=55.02 degree

Related Questions

Navigate

• Browse (All)
• Browse S
• Subjects

---

---

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.