15.4. The profile shown in Figure 15.31 is to be turned. Write blocks for execut

Question

15.4. The profile shown in Figure 15.31 is to be turned. Write blocks for executing the tool move- ments listed in both absolute and incremental modes. Use a feed rate of 01 ipr and a spindle speed of 500 rpm. Assume TNR right is in effect and the TNR is 032 in. Program number: 01515 TNR compis canceled (G40) TNR crop canceled 08.000 Path of the cutter center 02.250 92000 1.750 Programmed path X(U) 1000 TNR comp right (G42) is in effect 400 100 ?.600 1.000 4.000 NOTE: 1. USE 2.000 DIA, BAR STOCK x 1.75 LONG AND FACED. Absolute coordinates Incremental coordinates Position G1 G42 G1 G42 UWF 0 Z. G40 X FIGURE 15.31 Print and tool path for TNR comp in 13.4

Explanation / Answer

please don't forget to give a tbumbs up..:)

absolute incremental position x -4 z -4 f 0.01 u -4 w -1 3 x -3.6 z -4 u 0.4 w 0 4 x -3.5 z -4.4 u 0.1 w -0.4 5 x -3.125 z -4.6 u 0.325 w -0.2 6 x -3 z -5 u 0.125 w -0.4 7 x -2.875 z -5 u 0.125 w 0 8

Related Questions

Navigate

• Browse (All)
• Browse 1
• Subjects

---

---

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.