Moving to another question will save this response Question 2 Pulses for a stepp

Question

Moving to another question will save this response Question 2 Pulses for a stepping motor are being transmitted at 4000 Hz. Design a filter to reduce 100-Hz noise but reduce the pulses by no more than 3 dB.. Value of capacitance for the Filter is : 0.1 Micro Farad -0 What is the type of filter required for this application ? C-I0 What is the voltage ratio achieved for the noise to a 3-4B ceduction of pulse frequency A Low Pass Filter 8 S C. High Pass Filter D.0.5 E.0.045 F.-28 G.-32 H 0025 : What is the voltage ratio in d8 What is the value of resistance required in K Ohms Moving to another question will save this response. 14

Explanation / Answer

what type of filter required for this application

Low pass

low pass filters are the filters which help in removing the short-term fluctuations and therby provide a smoother form of signal.Offers easy passage to low frequency signals.Filter which allows the signals of  frequnecy lower than the the cut-off frequency to pass and attneuates the signals of frequency higher than the cutoff.

Voltage ratio achieved is : 0.025

voltage ration in dB: -32

Related Questions

Navigate

• Browse (All)
• Browse M
• Subjects

---

---

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.