I need help completing this in multisim 1. Load the circuit E6B-1.MS7, shown in

Question

I need help completing this in multisim

1. Load the circuit E6B-1.MS7, shown in Figure 6B.1 Data Rey ?? 2 7474 Figure 6B.1: 4-bit D-type shift register 2. Press the 'D' key slowly and irregularly to load different patterns into the shift register. Now and then press the?key and see what happens. 3. How many clock pulses does it take for a bit to move through the shift register? 4. Convert the 4-bit D-type shift register into a 4-bit JK-type shift register. Sme hints Connect Q of one stage to J on the next stage. Connect Q' on one stage to K on the next stage. Page 1 of 4 Module 3: Laboratory 2B: Shift Registers .Clock all flip flops at the same time .The J and K inputs on the first flip flop should always be different 5. Compare the way data is clocked into the D-type shift register with that of the JK flip flop shift register

Explanation / Answer

2. it is a data flipflop where the data input is 1 output will be 1 and if it is 0 output will be 0.

so once D is pressed it tends to 1 and moved to next flipflop. like wise whenever D is pressed it willbe incremented.

when pressing C no change occurs because its 0

3. one clock bit

4. if it is JK flipflop if both the inputs are 1 then the output will be togggle. based on clock pulse.

if both input 0 then output will be 0

set condition

then reset condition

then toggle condition will get appeared in jk flipflop

5. compare jk with d flipflop

D filpflop is best especially in designing shift registers

Related Questions

Navigate

• Browse (All)
• Browse I
• Subjects

---

---

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.