Computer Science Networks HW - Networks, IP Addresses, and more There are also p

Question

Computer Science Networks HW - Networks, IP Addresses, and more

There are also parts a) and b) to this which I have created separate questions for. Please help if possible/not already done. Thanks.

Part A: https://www.chegg.com/homework-help/questions-and-answers/computer-science-networks-hw-networks-ip-addresses-also-parts-b-c-created-separate-questio-q17075897

Part B: https://www.chegg.com/homework-help/questions-and-answers/computer-science-networks-hw-networks-ip-addresses-also-parts-c-created-separate-questions-q17075961

Problem 6. Consider the network below, where the home network uses a wi-fi access point that combines a base station, DHCP server, and a NAT box, and a router (which they commonly do) In this network, host H uses access point AP as the DHCP server to obtain its private IP address and other necessary information to connect to the Internet (in particular, it will obtain the AP's private IP address as the address of the default router). The AP obtains its public IP address from the ISP's DHCP server S and configures its routing table to use router R for all external IP addresses.

Explanation / Answer

C)

he following basic segment of the Centralized the Access Controller (AC). we consider the controller capacity to be actualized on a WLAN switch and call the capacity an AC. We additionally utilize the expression "WTP" to allude to APs (fat, thin, or fit).

The Control and Provisioning of Wireless Access Points (CAPWAP) Working Group in the IETF is chipping away at characterizing the interface and convention between an AP and its controlled WTP. This uses the CAPWAP system to detail the interface between the AC and the WTP.

a venture system with numerous ACs and WTPs. The WTPs can be associated with the ACs through a Layer 2 (exchanged) or Layer 3 (directed) system. The interface between the WTP and the AC is in charge of the accompanying:

Revelation and choice of an AC by WTP

Firmware download to the WTP by the AC—upon startup and after activating by the WTP

Abilities arrangement between the WTP and the AC

Shared verification between the WTP and the AC

Arrangement, status, and measurements trade between the WTP and the AC

QoS mapping over the wired and remote sections.

Air conditioning and WTP Interaction

The WTP gives data, for example, equipment, programming, or boot form; greatest number of radios; radios being used; encryption capacities; kind of radio (802.11b/g/a/n); sort of MAC (neighborhood, split, or both); burrowing modes; and casing sort in the middle of AC and WTP (for instance, nearby spanning or local connecting—that is, exemplifying all client payloads as local remote casings).

The AC data incorporates equipment or programming form, number of portable stations at present connected with the AC, number of WTPs at present joined to the AC, most extreme numbers for each of these, security parameters (confirmation certifications) in the middle of AC and WTP, control IPv4 or IPv6 location, et cetera.

Since the WTPs fall under the class of "Fit APs," they can likewise be arranged with an IP address from the AC. Another parameter that can be arranged is ACLs at the MAC location level.

Rebooting (reset) of the WTP should be possible by the AC whenever. Freely, the WTP can ask for another picture through an Image Data Request, which is trailed by an Image Data Response and the picture information itself.

Occasions are sent by the WTP when it establishes that it has vital data to send to the AC. Such data can incorporate information exchange messages that can be utilized to convey investigate data from the WTP to the AC.

Related Questions

Navigate

• Browse (All)
• Browse C
• Subjects

---

---

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.