The follows is in data center field. What does LEED stand for? Answer: Which org
ID: 3606453 • Letter: T
Question
The follows is in data center field.
What does LEED stand for?
Answer:
Which organization published the Data Center Tier Classification standards, defining the various capabilities of robustness, from Tier 1 to Tier 4?
Answer:
From which Data Center Budget will your monthly power expenses be allocated?
Answer:
From which Data Center Budget will your building expenses be allocated?
Answer:
Most large commercial Data Centers use these components to add protection against commercial power failure.
Answer:
The Microsoft Chicago Data Center is what kind of Data Center?
Answer:
What is the length of a Microsoft Data Center Module that is used in the Generation 3 and Generation 4 Data Centers?
Answer:
For Direct Current (DC), power =
Answer:
What is the major difference between Architectural and Engineering Drawings and drawings done by IT Staff?
Answer:
Because of the danger it represents to the environment, which kind of gas is now forbidden for use in Fire Protection in U.S. Data Centers?
Answer:
In Data Center Facility Networking terminology, what does “MDF”stand for?
Answer:
When planning your cable layouts, what is one of the main dangers to your cabling?
Answer: C.
Which is the newest architectural standard in use for creating Data Center Facility architectural drawings?
Answer:
What is the best first step in planning the build of a Greenfield Data Center Project?
Answer:
In 2017, what is the most comprehensive Information Security Compliance Framework that is used to ensure that Data Centers are adhering to a reliable set of Information Security standards?
Answer:
In a given Data Center, one of the Colo Rooms requires 2.8 MW of power for all the equipment. How many BTUs does 2.8 MW represent?
Answer:
How many BTUs will a 20-ton CRAC unit cool per hour?
Answer:
Consider the diagram below:
Which type of electrical power configuration is this?
Answer:
Because of data collected during the Microsoft Tent Project, in the future, Data Centers will most likely be:
Answer:
In which aisle will you find the backs of the servers facing each other?
Answer:
In which aisle will you find the fronts of the servers facing each other?
Answer:
Which professional standard contains the guidelines for cooling and humidity in modern Data Centers:
Answer:
In a standard, in-door, raised floor Data Center, you need to lift floor tile to gain access to the sub-floor area so you get plug a power cord into a 30 amp circuit connection. What is the safest method to lift and remove this floor tile?
Answer:
In a standard, in-door, raised floor Data Center, you need to estimate the straight-line distance in feet between two pieces of equipment. On this particular day, you forgot your trusty tape measure. What is the quickest method to accurately estimate the distance in feet?
Answer:
In a standard, in-door, raised floor Data Center, there are typically standard floor tiles. What are the dimensions of these floor tiles?
Answer:
In a well-designed Data Center, which direction will the fronts of your server cabinets face?
Answer:
Fenestration refers to what property of a building?
Answer:
When designing your “Greenfield” Data Center project, what is the first most important step?
Answer:
When you are planning a new Data Center, which of the following is probably not a critical site selection factor?
Answer:
When planning your Disaster Recovery Plan and your Business Continuity Plan, what does RPO mean?
Answer:
When planning your Disaster Recovery Plan and your Business Continuity Plan, what does RTO mean?
Answer:
Historically speaking, which type of IT equipment generates the most BTU output in a Data Center?
Answer:
Why is the weight of equipment a critical consideration in a raised floor environment?
Answer:
In Data Center performance measurements, what is the W.U.E.?
Answer:
How do you calculate C.U.E?
Answer:
You have been asked to calculate and report on the P.U.E. for another Data Center that you are analyzing. If the total facility electrical power usage is 12,250 kW and your total IT equipment power requirement is 6,700 kW, what is the P.U.E. of your facility?
Answer:
You have been asked to calculate and report on the P.U.E. for a Data Center that you are analyzing. If the total facility electrical power usage is 7,500 kW and your total IT equipment power requirement is 3,100 kW, what is the P.U.E. of your facility?
Answer:
Which of the following numbers would be the most desirable target for P.U.E.?
Answer:
How do you calculate P.U.E.?
Answer:
What is P.U.E.?
Answer:
The formula for watt all provides us with a quantitative method to understand the capability of electrical power to do work: Current (I), Watt (P), and Voltage (E). Which of the following is the the legitimate version of the watt formula calculation:
Answer:
Ohm’s law provides us with a quantitative method to understand the following basic attributes of electrical power: Current (I), Resistance (R), and Voltage (E). Which of the following is NOT a legitimate version of the Ohm’s Law calculation:
Answer:
What is Moore’s Law?
Answer:
The list of possible team members in a “Greenfield” Data Center build-out project is shown below. Which of the people in this list would NOT be a key member of the Team?
Answer:
If each of the projects described below involved 50,000 servers, which would probably be most complex?
Answer:
What is concurrent maintainability?
Answer:
You are a new Data Center Architect and you have been tasked with building a new Data Center that will have 99.9% of uptime availability per year. Based on a 365 day year, how long can your Data Center be down?
Answer:
Which of the following Data Center categories would require the greatest amount of time and resources to build, but would also provide the greatest benefit in terms of availability?
Answer:
The professional standard that was developed to define Data Centers, Data Center layouts and various best practices in cabling configurations is known as:
Answer:
Some of the most important concepts for the Data Center Architect are:
Answer:
*** BONUS QUESTIONS ***
What is the power consumption (in KVA) of the first generation of Microsoft Data Center Modules installed at the Microsoft Chicago Data Center in 2008?
Answer:
Who was the first assigned Data Center Manager of the Microsoft Chicago Data Center?
Answer:
In what Illinois city is the Microsoft Chicago Data Center located?
Answer:
Explanation / Answer
What does LEED stand for?
Answer: LEED stands for Leadership in Energy Environmental Design.
Which organization published the Data Center Tier Classification standards, defining the various capabilities of robustness, from Tier 1 to Tier 4?
Answer: The Uptime Institute
From which Data Center Budget will your monthly power expenses be allocated?
Answer: physical security
Most large commercial Data Centers use these components to add protection against commercial power failure.
Answer:UPS, with batteries and also a generator
The Microsoft Chicago Data Center is what kind of Data Center?
Answer: Illinois showcases a container-driven design that Microsoft expects to deliver huge benefits in cost and energy efficiency.
What is P.U.E.?
Answer: Power Usage Effectiveness
Related Questions
drjack9650@gmail.com
Navigate
Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.