1. Jonathan is building a system using an Intel i3 processor and has purchased a
ID: 3697449 • Letter: 1
Question
1. Jonathan is building a system using an Intel i3 processor and has purchased a new motherboard from ASUS. He would like to use an old (but working) ATX power supply he has laying around to power the system. Why might this not be a good idea?
2. John has a system that runs a 3.2 GHz and uses a 128mb AGP video card. He uses windows xp professional and wants to its multiple monitor support feature. Can he add another AGP video card? Why or why not
3. Dianne is try to install an ATX motherboard in a new, empty ATX case. She tries to set it down in the bottom of the case but it won’t fit, the ports on the side are to low to poke out the back of the case and she can’t make the screws work at all. What has she forgotten?
4. After Erik reassembled his pc and turned it one he noticed that the green Led and the disk Led never light up but everything seems to work okay what is the problem
5. You’ve installed an NIC and a PCI fire wire controller card on Susan’s windows visa professional with a black exclamation mark beside the NIC icon. What is the problem?
Explanation / Answer
1. Jonathan is building a system using an Intel i3 processor and has purchased a new motherboard from ASUS. He would like to use an old (but working) ATX power supply he has laying around to power the system. Why might this not be a good idea?
Answer:
This is a good idea beacuse ATX power supply available everywhere, and they can output tremendous amounts of power in a small form factor. They have overload protection built right in, and even a 500W model can be reasonably priced with high efficiency. The voltage rails are incredibly stable. Giving nice, clean DC current even at high loads.Also, it's likely that many of you simply have an extra one lying around doing nothing. Might as well get the most value for your investment.
2. John has a system that runs a 3.2 GHz and uses a 128mb AGP video card. He uses windows xp professional and wants to its multiple monitor support feature. Can he add another AGP video card? Why or why not
Answer:
Yes.He can add another AGP video card but it depends on what you want the cards to do and whether or not you want them to work together (e.g. SLI or Crossfire). If he is looking to use more than one card to increase their graphics processing power,You'll need and SLI or Crossfire bridge to connect the cards.
If you'd like to install more than one card, but don't need them to work together, you need to meet the following conditions:
There need to be available resources on the computer. By this we mean appropriate slots and space.
Ensure you're not using an EGA, CGA, or VGA card in one computer.
Ensure you're using an operating system that supports multiple monitors. Almost all modern operating systems support multiple monitors. Anything earlier than Windows 98 does not support multiple monitors.
3. Dianne is try to install an ATX motherboard in a new, empty ATX case. She tries to set it down in the bottom of the case but it won’t fit, the ports on the side are to low to poke out the back of the case and she can’t make the screws work at all. What has she forgotten?
Answer:
All cases will come with "risers", they are little screw like things which make it so the motherboard safely secures to the case without grounding the motherboard.
Make sure you match up all the riser spots in the case with the motherboard holes. The hole positions on the case and motherboard are standardized. Then make sure each hole on the motherboard has the corresponding riser in place, so you can screw it down to them when the motherboard is in place. Some holes will not be necessary, this is why checking positions first is necessary.
Connect all power connectors on the motherboard, and reference the manual to make sure the ones you are plugging in are necessary. Also make sure to follow the "front IO" guide in the manual, this is so the power/reset/HDD LED are properly setup.
4. After Erik reassembled his pc and turned it one he noticed that the green Led and the disk Led never light up but everything seems to work okay what is the problem
Answer:
Loose power supply - Just unplug the computer from the main power source,
then keep the power button the CPU pressed for 30 sec.
5. You’ve installed an NIC and a PCI fire wire controller card on Susan’s windows visa professional with a black exclamation mark beside the NIC icon. What is the problem?
Answer:
upgrading the NIC driver will solve the problem But mostly, when you have NIC problems, you should do a hardware analysis.
Related Questions
Navigate
Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.