2b Shutting down the power source to prevent hazard Use of good quality electric

Question

2b

Shutting down the power source to prevent hazard

Use of good quality electric switch and with a good maintenance

3

Remove the less active spare parts and made them replaced with the best quality

All parts need to be bought from good suppliers and required to be checked by the electrician before installing.

4

Need to check its performance and need to ensure with “A” level secured functionalities

Maintenance needs to be updated very often to ensure safety

5

Potential Risk or danger to be avoided

Risk factors needs to be quickly solved to meet all the standards

6

Major fault leads to block the mechanical and hydraulic parts

Need to fix the block by the workers

7

Machines ceased for energy dissipation

Trained workers are to be brought to fix the issue

9

To prevent hazards all are disconnected including blocks and locks are removed

The performance needs to be upraised to bring improvement in the working process

10

With full performance, machines need to be identified to eliminate faults

Removing the fault and help to permit the return of the machine operation

**8 is not available on the question

2b

Shutting down the power source to prevent hazard

Use of good quality electric switch and with a good maintenance

3

Remove the less active spare parts and made them replaced with the best quality

All parts need to be bought from good suppliers and required to be checked by the electrician before installing.

4

Need to check its performance and need to ensure with “A” level secured functionalities

Maintenance needs to be updated very often to ensure safety

5

Potential Risk or danger to be avoided

Risk factors needs to be quickly solved to meet all the standards

6

Major fault leads to block the mechanical and hydraulic parts

Need to fix the block by the workers

7

Machines ceased for energy dissipation

Trained workers are to be brought to fix the issue

9

To prevent hazards all are disconnected including blocks and locks are removed

The performance needs to be upraised to bring improvement in the working process

10

With full performance, machines need to be identified to eliminate faults

Removing the fault and help to permit the return of the machine operation

Explanation / Answer

DOSH 210 LockoutTagout JSA(1) [Compatibility Model - Word Insert Draw Design Layout References Mailings Review V A A Aa Times New Roman Font Date: Log Number Title of Job Operation Lockout Procedure for XYZ Metal Stamping Press Employee Name and Job Title Analyst and Date: Approved By and Date: Iman I. Moore Dirision Bureau Section: Maintenance Department ABC Company Personal Protection Recommended or Required GHores, steel-toed safety boots wih neu-alip soles, long sleeves, long pants Shut off, lockout, and. Untrained operstor &faulry; la Training on machine designs put a narning tag ou component of machine the machine lb W'ear gloves 2 Disconsect power to 2a Sbock from disconnection the machine at the 2b local disconnect beg. O 3. Bring parts maintenance to place and secure personal lock in loccout loop on the disconnect box 5. Place warning tag ou the disconnect bey. Blocksuspended mechanical and bydraolsc parts 7. Test machine te ezrure power is off and sespended energy has dissipated 200 words

Related Questions

Navigate

• Browse (All)
• Browse 2
• Subjects

---

---

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.