Sequnce of job number : Hazard : Recommended safe job procedure 2b : Shock from

Question

Sequnce of job number :                           Hazard :         Recommended safe job procedure

2b : Shock from disconnection : Always wear the safety gloves before touching the electrical switches

3: body limb gets in contact with a still moving part : Do not touch or obstruct any of the moving part

: Wait patiently till all the moving parts come to a

standstill

4. Lock gets dropped on the worker’s feet : Worker bends to pick the lock and hits the furniture nearby

Always wear safety shoes

Stay clear of any machinery/furniture

5. Warning tag gets dropped on the worker’s feet : Always wear safety shoes

   Warning tag pricks his feet when it falls on his feet : Always wear safety shoes

   Sharp edge or corner of warning tag pricks his hand   : Always wear safety gloves

6. While blocking the body part gets hit hard : Do not block until the mechanical or hydraulic part dies down to abysmally slow pace (almost dead)

Never put any body part (fingers, feet etc) between 2 pieces of machine parts that connect, touch or stamp each other

7. Machine switches on even when power switch is off (short-circuit) and hurts the employee : Perform the activity from a safe distance (do not assume all is right)

8. Body part gets bruised, cut, stomped while performing maintenance : Follow the steps by step process mentioned in standard operating procedure for maintenance, Wear all the protective gear, Use the tools slowly and articulately

9. Either of the blocks, lock or tags fall on the employee and he gets hurt : Wear all the protective gear

He bends to pick them and hits some other machine or slips off on the floor : Handle the clock, lock and tags slowly and keep them aside, away

10. Employee gets hurts while looking out for the supervisor : Keep the lights on and call out for the supervisor

Employee slips on the floor in a hurry to go away : Wear safety shoes and also always walk slowly on the shop floor

Explanation / Answer

Sign Table Too SH 210 LockoutT agout ISA() ICompatibility Mode]- Word Review View Design LayodTu me-ha·you wet to do Layout References Maings Emphass 1 Heading 1 Styles Paragraph Font Title of Job Operation Lockout Procedure for XYZ. Metal Stamping Press Log Number Employee Name and Job Title Analyst and Date Approved By and Date Iman J. Moore Maintenance Superintendent 11/06/13 Division Bureau/Section Maintenance Department /ABC Company Personal Protection Recommended or Required Gloves, steel-toed safety boots with non-slip soles, long sleeves, long pants 1. Shut off, lockout, and1. Untrained operator&faulty; la. Training on machine designs put a warning tag on component of machine the machine lb Wear gloves 2. Disconnect power to 2a. Shock from disconnection the machine at the 2b local disconnect box 3. Bring suspended parts to "neutral position 4. Worker performing maintenance to place and secure personal lock in lockout loop on the disconnect hox I

Related Questions

Navigate

• Browse (All)
• Browse S
• Subjects

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.