My issue is pretty visable, can anyone explain what i am doing wrong with these

Question

My issue is pretty visable, can anyone explain what i am doing wrong with these G02 commands.

%
:10
N5 G90 G20
N10 M06 T1
N15 M03 S1000
N20 M07
N25 G00 x1.19 y4.57 z1.0
N30 G01 z-0.10 f10.0
N35 x3.36
N40 y7.85
N45 x5.11
N50 y6.41
N55 G02 x6.22 y6.04 I0.93 J0.94
N60 G02 x6.88 y5.93 I0.44 J0.55
N65 G02 x7.93 y6.04 I0.38 J1.45
N70 G02 x8.72 y5.82 I0.63 J0.71
N75 G01 x8.72 y4.73
N80 x9.08 y4.07
N85 x8.96 y3.03
N90 x8.58 y2.84
N95 G02 x8.44 y2.66 I-0.01 J-0.14
N100 G01 x6.90 y1.49
N105 x6.81 y0.97
N110 x7.02 y0.19
N115 G02 x5.47 y1.26 I-0.27 J1.28
N120 G02 x4.84 y2.03 I0.69 J1.20
N125 G02 x3.15 y2.33 I-0.87 J0.0
N130 G02 x2.13 y3.53 I0.22 J1.23
N135 G02 x1.19 y4.57 I2.46 J3.15
N140 G00 z1.0
N145 M09
N150 M05
N155 M30

Explanation / Answer

G02 code will give you clock wise rotation where as G03 code will give you counter clockwise rotation. So when you select a end point giving G02 code, it will rotate the tool from starting point to end point in clock wise direction which is giving undesired results(rotation in clock wise direction) in above few cases. So give the code G03 in above cases I.e when you want the tool to rotate in counter clock wise direction. according to the shape of curve use the code G02 or G03. I hope this will help you.

Related Questions

Navigate

• Browse (All)
• Browse M
• Subjects

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.