A water pipe of length L = 1 m is surrounded by ambient air at a temperature of

Question

A water pipe of length L = 1 m is surrounded by ambient air at a temperature of T infinity = -10 degree C. The water in the pipe is frozen. A thin electric heating tape is wrapped around the pipe in order to melt the ice. The physical nature of the contact between the tape and the surface of the pipe introduces a thermal contact resistance of rt, c = 0.01 m2K/W. The inner radius of pipe is ri = 25 mm and an outer radius of the pipe is r o =75 mm. The pipe material has a thermal conductivity of k = 10 W/m/K. The convection coefficient for heat transfer from the pipe to the surrounding air is h = 100 W/m/K. For ice, the latent heat release on melting is his = 334.0 kJ/kg, and the density of ice is rho ice = 0.9167 g/cm3. What is the minimum power required by the heater tape (Q elec, min) to melt the ice in the pipe? Once the ice is heated to the melting point, it is desired to melt all the ice in the pipe in 5 hours. To accomplish this, what temperature must the outer surface of the heating tape be held at? What power is required by the heater tape to achieve this surface temperature? Suppose that the heater tape power found in part B is held on indefinitely. To what temperature will the water in the pipe be heated?

Explanation / Answer

your solution is at Digi-Key’s library of more than 1600 exclusive PTM Online… On Demand® product training modules is a collection of training tools created with you – the busy design engineer – in mind. They are provided with the cooperation of participating supplier partners. From this one source, you can learn about the latest products and technologies, download datasheets, check inventory, contact our technical staff, and place an order for same-day shipment. These modules are available in audio and non-audio formats and listed by supplier in easy-to-find alphabetical order. Simply locate the module that interests you and click on your format of choice. We hope you find these tools useful, and with new modules added continuously, we invite you to stop back often to see what’s new. Product Training Modules Online...On Demand® is a registered trademark of Digi-Key Corporation. = Updated Product Training Module - PTM = New Product Training Module - PTM Module Name Preview Audio Non-Audio Duration Parts List maxiFLOW™ Heat Sinks 3.5MB 1.8MB 5 min Parts List maxiGRIP™ and Board Level Cooling 4.3MB 1.9MB 5 min Parts List maxiGRIP™ and Board Rework Costs 3.3MB 1.5MB 10 min Parts List maxiGRIP™ Flip-Chip 3.8MB 1.4MB 5 min Parts List maxiGRIP™ Heat Sink Attachment 4.9MB 2.1MB 10 min Parts List Phase Change - Pressure Increase maxiGRIP™ 4.6MB 2.2MB 20 min Parts List select a one having your problem solution

Related Questions

Navigate

• Browse (All)
• Browse A
• Subjects

---

---

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.