Using the Lubricant Circuit Wiring and Lane Diagram and the meter readings, answ

Question

Using the Lubricant Circuit Wiring and Lane Diagram and the meter readings, answer questions 1-3. A solenoid- operated valve is used to dispense lubricant. Lubricant flows to the brush when the solenoid is energized lubricant stops following when the solenoid is the energized. NO relay contacts are used in the circuit. NC relay contacts arc used in the circuit. and. aid the pin numbers of the relay coil. and tie the terminal trip numbers wired to the relay coil. and arc the relay pm numbers in parallel with the Open Pushbutton. r relay contact to parallel with the pushbutton is wired to and terminal

Explanation / Answer

1. 4 number of NO relay contacts are used in the circuit

2. 2 number of NC relay contacts are used in the circuit

3. 2 and 1 are the pin number of the relay coil

4. 1 and 7 are the terminal strip numbers wired to the relay coil

5. 2 and 3 are the relay pin numbers in parallel with the open pushbutton

6. The relay contact in parallel with the pushbutton is wired in 3 and 5 terminal

Related Questions

Navigate

• Browse (All)
• Browse U
• Subjects

---

---

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.