Write a documented program to simulate the operation of a sequential tail light

Question

Write a documented program to simulate the operation of a sequential tail light system. The light system consists of three separate lights on each side of the car. Each set of light will be activated separately, by either the left or right turn signal switch. There is to be a 1 second delay between the activation of each light, and a 1 second period when all lights arc off. Ensure that, with both turn signal switches on. the system will not operate. The sequence of operation could be as follows: The switch is operated Light 1 is illuminated Light 2 is illuminated 1 second later. Light 3 is illuminated for 1 second All lights are of for 1 second The system repeats while the switch is on. Use the I/O simulator and sequencer output instruction to implement the following sequence. Output O:2/O and Output 0:2/4 on for 5 seconds Output 0:2/1 and Output O:2/5 on for 10 seconds Output 0:2/2 and Output 0:2/6 on for 15 seconds Output 0:2/3 and Output O:2/7 on for 20 seconds

Explanation / Answer

please post qustion no 5 again

becouse AS per Chegg guide line only one qustion is allowed once

please rate positivly

Related Questions

Navigate

• Browse (All)
• Browse W
• Subjects

---

---

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.