Looking for a Packet tracer or hand written drawing of the following below. Im n

Question

Looking for a Packet tracer or hand written drawing of the following below. Im not really understanding this topology but I may simply be overthinking it, Create the physical cable linkage by redundantly connecting three serial links between the routers. (Each router will have two serial links, one for each of the other two routers.) Select, place, and physically connect three switches, two for each of the router's- to the router's respective Fast Ethernet interfaces. Label the cables (Cat5 straight or serial crossover). Select and place a combination of laptop and workstations onto the topology, one host per switch, and connect each to its respective switch. Use private IP network 172.22.0.0/16 to create your subnets derived using your own original scheme with the following guidelines. IP addresses should be labeled for each router interface on your workspace topology, both serial and Fast Ethernet interfaces. All IP addressing will use VLSM to waste as few addresses as possible. CIDR notation is permitted in lieu of the subnet mask on your labels. Serial links should support two hosts, one for each end. The two Ethernet networks on each router will be as follows: A server LAN of six host addresses An employee LAN of 126 host addresses Label each of your host workstations with its IP address. Change the hostnames of the Routers and Switches to reflect the names on the topology map. Provide each router's Fast Ethernet interfaces with IP addresses. Provide the host machines with an IP address such that they can ping the Fast Ethernet Interface.

Explanation / Answer

Packet Tracer is a protocol simulator developed at Cisco Systems. Packet Tracer (PT) is a powerful and dynamic tool that displays the various protocols used in networking, in either Real Time or Simulation mode. This includes layer 2 protocols such as Ethernet and PPP, layer 3 protocols such as IP, ICMP, and ARP, and layer 4 protocols such as TCP and UDP. Routing protocols can also be traced. Packet Tracer is a supplement to and not a replacement for experience with real equipment. Students are encouraged to compare the results obtained from Packet Tracer network models with the behavior of real equipment.

Choosing Devices and Connections

We will begin building our network topology by selecting devices and the media in which to connect them. Several types of devices and network connections can be used. For this lab we will keep it simple by using End Devices, Switches, Hubs, and Connections.
Single click on each group of devices and connections to display the various choices. When we select a device in the left panel, in the right panel we see all the listed devices of that type.

Related Questions

Navigate

• Browse (All)
• Browse L
• Subjects

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.