There are 40 pins in the original 8086 microprocessor. Write the name of the pin

Question

There are 40 pins in the original 8086 microprocessor. Write the name of the pin (from the list below) that best matches the given description. Use the minimum mode signal designations for this problem. Each term is used no more than once, and not all of the terms will be used. ___ If this pin is active, the databus is being read into the CPUs internal data bus. ___ Works with the WAIT instruction: is set when the wait instruction is executed. ___ If the pin is low then the CPU will idle. When high, the CPU is 'ready ___ Interrupt request pin, and is set (1) when an external interrupt is present ___ Non-maskable interrupt (signals ignore the interrupt flag). When this signal is active, the CPU will use interrupt vector 2......used for gnarly interrupts. ___ If this pin is high for at least 4 clock cycles, the CPU is rest. ___ this pin selects the mode of processing ___ used to demultiplex the address/data bus: active high enable control signals that the multiplexed A/D bus bits 15 through 0 contain address information ___ when happy and content, a soft motor-type of sound can be heard from this ___ Heartbeat of the CPU ___ V_cc ___ Power ___ ground

Explanation / Answer

READ

TEST

READY

INTR

NMI

RESET

MN/MX

AD0 - AD15

since the image was not complete I could provide with only these.

Related Questions

Navigate

• Browse (All)
• Browse T
• Subjects

---

---

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.