Question
Help please!
A hydraulic pump, valve and motor system is shown below. Neglecting friction losses in the hoses and connections and pressure changes due to elevation differences determine the following: The pressure (psi) and flow (gpn) at all labeled points The speed (rpm) and torques (ft-lbs) of the motor The torque (ft-lbs) and power (Hp) to the pump. What size (in ID and dash size)hoses do you recommend for all labeled points? Calculations must support recommendations Clearly state the criteria used for sizing at each location At what rate (Btu'/min) is heat being added to the oil
Explanation / Answer
qestion is incomplet
