Browse A
Alphabetical listing with fast deep pagination.
167681 items • Page 173 / 3354
A 5.00-mL sample of nitric acid required 13.25 mL of 0.0842 M strontium hydroxid
A 5.00-mL sample of nitric acid required 13.25 mL of 0.0842 M strontium hydroxide for titration. Calculate e molarity of the acid solution. A solution made by adding 9.00 g of pho…
A 5.00-wt% aqueous sulfuric acid solution ( density = 1.03 g/ML ) flows through
A 5.00-wt% aqueous sulfuric acid solution ( density = 1.03 g/ML ) flows through a 45-m long pipe with a 6.0 cm diameter at a rate of 87L/min. What is the molarity of sulfuric acid…
A 5.00-wt% aqueous sulfuric acid solution (density=1.03 g/mL)flows through a 45-
A 5.00-wt% aqueous sulfuric acid solution (density=1.03 g/mL)flows through a 45-m long pipe with a 6.0 cm diamete at a rate of87 L/min. (a) What is the molarity of the sulfuric ac…
A 5.00-wt% aqueous sulfuric acid solution (p =1.03 g/ml) flows through a 45-m lo
A 5.00-wt% aqueous sulfuric acid solution (p =1.03 g/ml) flows through a 45-m long pipe with a 6.0 cm diameter at a rate of 87 L/min What is the molarity of sulfuric acid in the s…
A 5.000 g piece of cobalt metal is added to a 106.5 mL of 2.05 M gold(I) nitrate
A 5.000 g piece of cobalt metal is added to a 106.5 mL of 2.05 M gold(I) nitrate. A reaction occurs resulting in the formation of gold metal and cobalt(III) nitrate in solution. a…
A 5.000g sample of pesticide was decomposed with metallic sodium in alcohol and
A 5.000g sample of pesticide was decomposed with metallic sodium in alcohol and the liberated chloride ion was precipitated as AgCl. Express the results of this analysis as percen…
A 5.00F capacitor is initially charged to a potential of 16.0V . It is then conn
A 5.00F capacitor is initially charged to a potential of 16.0V . It is then connected in series with a 3.75mH inductor.PartA:What is the total energy stored in this circuit?PartB:…
A 5.00g piece of Copper metal is added to a colorless aqueoussolution that conta
A 5.00g piece of Copper metal is added to a colorless aqueoussolution that contains 20.0g of Zn(No3)2. The products that form are a water soluble blue ioniccompound and a gray met…
A 5.00kg piece of wood slides on a surface shown in the figure to the right. The
A 5.00kg piece of wood slides on a surface shown in the figure to the right. The curved sides are perfectly smooth, but the rough horizontal bottom is 30m long and has a kinetic f…
A 5.00mL sample of blood was treated with trichloroacetic acid to precipitate th
A 5.00mL sample of blood was treated with trichloroacetic acid to precipitate the proteins. After centrifugation, the resulting solution was brought to p^H 3.0 and extracted with …
A 5.00wt% aqueous sulfuric acid solution(p=1,03g/mL) flows through a 45-m long p
A 5.00wt% aqueous sulfuric acid solution(p=1,03g/mL) flows through a 45-m long pipe with a 6.0cm diameter at a rate of 87L/min a) what is the molarity of sulfuric acid in the solu…
A 5.00{\ m kg} chunk of ice is sliding at 10.0{\ m m}/{\ m s} on the floor of an
A 5.00{ m kg} chunk of ice is sliding at 10.0{ m m}/{ m s} on the floor of an ice-covered valley when it collides with and sticks to another 5.00{ m kg} chunk of ice that is initi…
A 5.05g samplers a compound is dissolved in enough water to form 100.0mL of solu
A 5.05g samplers a compound is dissolved in enough water to form 100.0mL of solution. This solution has an osmosis pressure of 0.03289 atm at 25 middot C. If it is assume that eac…
A 5.07 g sample of water is introduced into a 0.668 L flask containing some C 2
A 5.07 g sample of water is introduced into a 0.668 L flask containing some C2H2 gas. The flask is heated to 233.53 °C at which temperature all of the water is converted to the ga…
A 5.079 g sample of a solid, weak, monoprotic acid is used to make a 100.0 mL so
A 5.079 g sample of a solid, weak, monoprotic acid is used to make a 100.0 mL solution. 26.00 mL of the resulting acid solution is then titrated with 0.09454 M NaOH. The pH after …
A 5.079 g sample of a solid, weak, monoprotic acid is used to make a 100.0 mL so
A 5.079 g sample of a solid, weak, monoprotic acid is used to make a 100.0 mL solution. 26.00 mL of the resulting acid solution is then titrated with 0.09454 M NaOH. The pH after …
A 5.09 m solution of the solute water dissolved in the solventethanol is availab
A 5.09 m solution of the solute water dissolved in the solventethanol is available. Calculate the mass ( kg ) of the solutionthat must be taken to obtain 0.6350 kg of water. Molar…
A 5.09-mm-high firefly sits on the axis of, and 10.3 cm in front of, the thin le
A 5.09-mm-high firefly sits on the axis of, and 10.3 cm in front of, the thin lens A, whose focal length is 5.71 cm. Behind lens A there is another thin lens, lens B, with focal l…
A 5.0L reaction flask initially contains 0.030 mol sulfuryl chloride at 177°C. S
A 5.0L reaction flask initially contains 0.030 mol sulfuryl chloride at 177°C. Sulfur dioxide and chlorine form: SO2Cl2(g) <---> SO2(g) +Cl2(g). After equilibrium is establi…
A 5.0kg block is held at rest against a vertical wall by ahorizontal force of 20
A 5.0kg block is held at rest against a vertical wall by ahorizontal force of 200N. a) what is the magnitude of the frictional force needed toprevent the block from falling? b) wh…
A 5.0mL volume of 0.00200 M SCN- is mixed with5.0mL of 0.0200 M Fe^3+ to form th
A 5.0mL volume of 0.00200 M SCN- is mixed with5.0mL of 0.0200 M Fe^3+ to form the blood-redFeNCS^2+ complex. The equilibrium molar concentration ofthe FeNCS^2+ determined from a c…
A 5.1 g marble is fired vertically upwardusing a spring gun. The spring must be
A 5.1 g marble is fired vertically upwardusing a spring gun. The spring must be compressed 8.0 cm if themarble is to just reach a target 13 mabove the marble's position on the com…
A 5.1 kg block with a speed of 14 m/s collides with a 19 kg block that has a spe
A 5.1 kg block with a speed of 14 m/s collides with a 19 kg block that has a speed of 6.2 m/s in the same direction. After the collision, the 5.1 kg block is observed to be travel…
A 5.1 kg block with a speed of 14 m/s collides with a 19 kg block that has a spe
A 5.1 kg block with a speed of 14 m/s collides with a 19 kg block that has a speed of 6.2 m/s in the same direction. After the collision, the 5.1 kg block is observed to be travel…
A 5.10 g sample of a white powder identified as cocaine is analyzed in a laborat
A 5.10 g sample of a white powder identified as cocaine is analyzed in a laboratory. The entire sample dissolves in water. Upon adding sodium hydroxide to the dissolved sample, co…
A 5.15-g bullet is moving horizontally with a velocity of +359 m/s, where the si
A 5.15-g bullet is moving horizontally with a velocity of +359 m/s, where the sign + indicates that it is moving to the right (see part a of the drawing). The bullet is approachin…
A 5.15pF parallel-plate air-filled capacitor with circular plates is to be used
A 5.15pF parallel-plate air-filled capacitor with circular plates is to be used in a circuit in which it will be subjected to potentials of up to 125V . The electric field between…
A 5.17-g bullet is moving horizontally with a velocity of +340 m/s, where the si
A 5.17-g bullet is moving horizontally with a velocity of +340 m/s, where the sign + indicates that it is moving to the right (see part a of the drawing). The bullet is approachin…
A 5.17-g bullet is moving horizontally with a velocity of +369 m/s, where the si
A 5.17-g bullet is moving horizontally with a velocity of +369 m/s, where the sign + indicates that it is moving to the right (see part a of the drawing). The bullet is approachin…
A 5.18 kg block located on a horizontal frictionless floor is pulled by a cord t
A 5.18 kg block located on a horizontal frictionless floor is pulled by a cord that exerts a force F=12.5N at an angle theta=20.0degrees above the horizontal, as shown. What is th…
A 5.180 kg block of wood rests on a steel desk. The coefficient of static fricti
A 5.180 kg block of wood rests on a steel desk. The coefficient of static friction between the block and the desk is ?s = 0.555 and the coefficient of kinetic friction is ?k = 0.3…
A 5.2 kg block with a speed of 14 m/s collides with a 11 kg block that has a spe
A 5.2 kg block with a speed of 14 m/s collides with a 11 kg block that has a speed of 3.7 m/s in the same direction. After the collision, the 11 kg block is observed to be traveli…
A 5.2 kg block with a speed of 15 m/s collides with a 15 kg block that has a spe
A 5.2 kg block with a speed of 15 m/s collides with a 15 kg block that has a speed of 3.9 m/s in the same direction. After the collision, the 15 kg block is observed to be traveli…
A 5.2 kg toy race car can move along an x axis. The figure below gives F x of th
A 5.2 kg toy race car can move along an x axis. The figure below gives Fx of the force acting on the car, which begins at rest at time t = 0. (The vertical axis is marked in incre…
A 5.20 F capacitor that is initially uncharged is connected in series with a 7.0
A 5.20 F capacitor that is initially uncharged is connected in series with a 7.00 k resistor and an emf source with E= 145 V negligible internal resistance. (E) A long time after …
A 5.20 F capacitor that is initially uncharged is connected in series with a 7.0
A 5.20 F capacitor that is initially uncharged is connected in series with a 7.00 k resistor and an emf source with E= 145 V negligible internal resistance. (E) A long time after …
A 5.20 g sample of trans-1,2-diethylcyclopropane (formula C 7 H 14 ), is mixed w
A 5.20 g sample of trans-1,2-diethylcyclopropane (formula C7H14), is mixed with 35.67 atm of O2 in a 7.38×10-1 L combustion chamber at 204.18 °C. The combustion reaction to CO2 an…
A 5.20 kg package slides 1.52 m down a long ramp that is inclined at 12.0 below
A 5.20 kg package slides 1.52 m down a long ramp that is inclined at 12.0 below the horizontal. The coefficient of kinetic friction between the package and the ramp is k = 0.310 P…
A 5.20-L sample of SiH4 gas at 356 mm Hg pressure and 25 °C is allowed to react
A 5.20-L sample of SiH4 gas at 356 mm Hg pressure and 25 °C is allowed to react with O2 gas. What volume of O2 gas, in liters, is required for complete reaction if the oxygen has …
A 5.20–kg block is set into motion up an inclined plane with an initial speed of
A 5.20–kg block is set into motion up an inclined plane with an initial speed of vi = 7.40 m/s (see figure below). The block comes to rest after traveling d = 3.00 m along the pla…
A 5.20–kg block is set into motion up an inclined plane with an initial speed of
A 5.20–kg block is set into motion up an inclined plane with an initial speed of vi = 7.40 m/s (see figure below). The block comes to rest after traveling d = 3.00 m along the pla…
A 5.22-kg object passes through the origin at time t = 0 such that its x compone
A 5.22-kg object passes through the origin at time t = 0 such that its x component of velocity is 5.15 m/s and its y component of velocity is -2.91 m/s. (a) What is the kinetic en…
A 5.25 F capacitor is initially charged to a potential of 16.4 V . It is then co
A 5.25 F capacitor is initially charged to a potential of 16.4 V . It is then connected in series with a 3.80 mH inductor. Part A What is the total energy stored in this circuit? …
A 5.25 kg crate is suspended from the end of a short vertical rope of negligible
A 5.25 kg crate is suspended from the end of a short vertical rope of negligible mass. An upward force F(t) is applied to the end of the rope, and the height of the crate above it…
A 5.25kg chunk of ice is sliding at 15.0m/s on the floor of an ice-covered valle
A 5.25kg chunk of ice is sliding at 15.0m/s on the floor of an ice-covered valley when it collides with and sticks to another 5.25kg chunk of ice that is initially at rest. Since …
A 5.29-g bullet is moving horizontally with a velocity of +367 m/s, where the si
A 5.29-g bullet is moving horizontally with a velocity of +367 m/s, where the sign + indicates that it is moving to the right (see part a of the drawing). The bullet is approachin…
A 5.29-mm-high firefly sits on the axis of, and 13.1 cm in front of, the thin le
A 5.29-mm-high firefly sits on the axis of, and 13.1 cm in front of, the thin lens A, whose focal length is 6.79 cm. Behind lens A there is another thin lens, lens B, with focal l…
A 5.290 kg block of wood rests on a steel desk. The coefficient of static fricti
A 5.290 kg block of wood rests on a steel desk. The coefficient of static friction between the block and the desk is ?s = 0.505 and the coefficient of kinetic friction is ?k = 0.2…
A 5.3 g bullet leaves the muzzle of a rifle with a speed of 320 m/s. What force
A 5.3 g bullet leaves the muzzle of a rifle with a speed of 320 m/s. What force (assumed constant) is exerted on the bullet while it is traveling down the 0.77 m long barrel of t…
A 5.3 kg particle moves along the x axis under the influenceof a single conserva
A 5.3 kg particle moves along the x axis under the influenceof a single conservative force. If the work done on the particle is 49 J as it moves from x1 =2.3 m to x2 = 4.3 m find …